Welina mai iā Fotma Alloy!
ʻaoʻao_banner

huahana

ʻO ka lāʻau ʻoki ʻoki ʻo Tungsten Carbide i hoʻopaʻa ʻia

ʻO ka wehewehe pōkole:

Hoʻohana nui ʻia ʻo Cemented tungsten carbide cutting blade no ka ʻoki ʻana i ka pepa, nā kiʻiʻoniʻoni plastik, ka lole, ka ʻūhā, ka ʻōpala, nā pahu keleawe, nā alumini alumini, graphite, etc.


Huahana Huahana

Huahana Huahana

wehewehe

Hoʻohana nui ʻia ʻo Cemented tungsten carbide cutting blade no ka ʻoki ʻana i ka pepa, nā kiʻiʻoniʻoni plastik, ka lole, ka ʻūhā, ka ʻōpala, nā pahu keleawe, nā alumini alumini, graphite, a me nā mea ʻē aʻe.Hoʻokumu ʻia e nā lako ʻoihana, hāʻawi ʻia kā mākou carbide blades me nā hiʻohiʻona maikaʻi, kiʻekiʻe kiʻekiʻe, ola paʻa, e hana ana i kāna hana kiʻekiʻe.

ʻOki ʻoki ʻana i ka lāʻau karbida (2)
ʻau karbida sima
lau karbida

Nā kikoʻī o ka FOTMA Cemented Carbide Blades

Material:Tungsten Carbide.
Pōmaikaʻi:Burr-free, hoʻohana nui ʻia.
mānoanoa:0.8-1.5mm, ka mānoanoa hoʻopilikino i loaʻa.
Anawaena o loko:25.4, 32, 38mm.
Anawaena waho:OD160 - 610mm, loaʻa ka nui maʻamau.
lihi pahi:45 °, hiki ke hoʻololi ʻia e like me kāu koi.
Hoʻolālā:lihi hoʻokahi a me ka ʻaoʻao pālua, i hana ʻia e like me nā manaʻo o nā mea kūʻai aku.
Noi:ʻO ka pepa, ke kiʻiʻoniʻoni, ka huʻa, ka pahu, ka pepa, ka graphite a pēlā aku.

ʻOki ʻoki ʻana i ka lāʻau karbida (1)

Papa Papa no na Lapa Oki Tungsten Carbide

Papa Papa ISO Māmā g/cm3 Oolea HRA≥ Ka ikaika kulou ≥N/mm² Palapala noi
YG3 K05 15.20-15.40 91.5 1400 ʻO ka nui o ka palaoa, kūpono no ka hao hoʻolei a me ka hana pololei metala ʻole.
YG3X K05 15.20-15.40 92 1300 ʻO ka nui o ka palaoa liʻiliʻi, kūpono no ka hao hoʻolei a me ka hana pololei metala ʻole.
YG4C 15.05-15.25 90 1620
YG6 K20 14.85-15.05 90.5 1860 ʻO ka nui o ka palaoa, hoʻohana ʻia no ka metala non-ferrous i ka mīkini ʻala
YG6A K10 14.85-15.05 92 1600 ʻO ka nui o ka palaoa liʻiliʻi, kūpono no ka mold wiredrawing a me ka mea hana lāʻau
YG6X K10 14.85-15.05 91.7 1800 ʻO ka nui o ka palaoa liʻiliʻi, kūpono no ka ʻoki metala non-ferrous
YG7 K20 14.65-14.85 89.7 1900 ʻO ka huila palaoa, ke kūpaʻa maikaʻi i ka lole a me ka anti-shocking maikaʻi
YG8 K30 14.60-14.85 90 2060 ʻO ka nui o ka palaoa, kūpono no ka mold wiredrawing, huki i ka mold
YG8A K30 14.6-14.85 90 2000 ʻO ka nui o ka palaoa, kūpono no ka mold wiredrawing, huki i ka mold, lāʻau hana lāʻau a pēlā aku.
YG8X K30 14.60-14.85 90.5 2000 Liʻiliʻi palaoa huila, kiʻekiʻe wela degere o ka paakiki, oxidation kū'ē a me ka anti-resilience
YG8C 14.55-14.75 88 2160 ʻO ka nui o ka palaoa Macro, kūpono no ka wili pōhaku niho poepoe a me ka ʻāpana wili pōhaku mine
YG10 K40 14.25-14.55 88 2160 ʻO ka nui o ka palaoa, kūpono no ka hoʻoponopono ʻana i ka hao haʻahaʻa hina hina
YG11 K40 14.30-14.50 87.5 2260 ʻO ka nui o ka palaoa, kūpono no nā ʻāpana pale ʻaʻahu a me ka mea hana mine
YG11C 14.20-14.40 87 2260 ʻO ka nui o ka palaoa Macro, kūpono ia no ka ʻāpana wili pōhaku
YG12 K40 14.10-14.40 87 2260 ʻO ka nui o ka palaoa, kūpono no ka mīkini ʻokiʻoki non-ferrous
YG15 13.95-14.15 87 2400 ʻO ka nui o ka palaoa, kūpono i ka mea hana a make
YG20 13.45-13.65 84 2480 Ka nui o ka palaoa, kūpono no ka make
YG20C 13.40-13.60 82.5 2480 ʻO ka nui o ka palaoa Macro, hoʻohana ʻia no ke anawaena 20-50mm ka mold die

  • Mua:
  • Aʻe:

  • E kākau i kāu leka ma aneʻi a hoʻouna mai iā mākou